topological edge. More...
#include <vtol_edge.h>
Public Types | |
| enum | vsol_spatial_object_2d_type |
Public Member Functions | |
| vtol_edge () | |
| Default constructor. Empty edge. Not a valid edge. | |
| virtual | ~vtol_edge () |
| Destructor. | |
| vtol_vertex_sptr | v1 () const |
| Return the first endpoint. | |
| vtol_vertex_sptr | v2 () const |
| Return the second endpoint. | |
| virtual vtol_zero_chain_sptr | zero_chain () const |
| Return the first non-empty zero-chain of `this'. | |
| virtual void | set_v1 (vtol_vertex_sptr new_v1) |
| Set the first endpoint. | |
| virtual void | set_v2 (vtol_vertex_sptr new_v2) |
| Set the last endpoint. | |
| virtual void | set_vertices_from_zero_chains () |
| Determine the endpoints of an edge from its inferiors. | |
| virtual void | replace_end_point (vtol_vertex ¤t_end_point, vtol_vertex &new_end_point) |
| replace the current end point. | |
| virtual bool | operator== (const vtol_edge &other) const |
| bool | operator!= (const vtol_edge &other) const |
| bool | operator== (const vsol_spatial_object_2d &obj) const |
| spatial object equality. | |
| virtual void | add_edge_loop (vtol_one_chain_sptr const &) |
| This is a utility method that adds new_edge_loop to the vtol_edge's superior list. | |
| virtual void | remove_edge_loop (vtol_one_chain_sptr const &) |
| This is a utility method that removes doomed_edge_loop from the vtol_edge's superior list. | |
| virtual const vtol_edge * | cast_to_edge () const |
| Return `this' if `this' is an edge, 0 otherwise. | |
| virtual vtol_edge * | cast_to_edge () |
| Return `this' if `this' is an edge, 0 otherwise. | |
| virtual const vtol_edge_2d * | cast_to_edge_2d () const |
| Return `this' if `this' is an edge, 0 otherwise. | |
| virtual vtol_edge_2d * | cast_to_edge_2d () |
| Return `this' if `this' is an edge, 0 otherwise. | |
| void | link_inferior (vtol_zero_chain_sptr inf) |
| Link `this' with an inferior `inferior'. | |
| void | unlink_inferior (vtol_zero_chain_sptr inf) |
| Unlink `this' from the inferior `inferior'. | |
| virtual bool | valid_inferior_type (vtol_topology_object const *inferior) const |
| Is `inferior' type valid for `this' ?. | |
| bool | valid_inferior_type (vtol_zero_chain_sptr const &) const |
| bool | valid_superior_type (vtol_one_chain_sptr const &) const |
| virtual vertex_list * | endpoints () |
| get a list of endpoints. | |
| virtual bool | share_vertex_with (vtol_edge_sptr const &other) |
| Returns true if the invoking edge has a vertex in common with vtol_edge `other'. | |
| virtual bool | add_vertex (vtol_vertex_sptr const &) |
| This method adds newvert to the vtol_edge by linking it to one of the zero_chains of the vtol_edge Inferiors. | |
| virtual bool | remove_vertex (vtol_vertex_sptr const &) |
| This method removes uglyvert from the vtol_edge by removing it from the inferior zero_chains. | |
| virtual bool | is_endpoint (vtol_vertex_sptr const &) const |
| virtual bool | is_endpoint1 (vtol_vertex_sptr const &) const |
| Returns True if v is equal to the first vtol_edge endpoint,v1_. | |
| virtual bool | is_endpoint2 (vtol_vertex_sptr const &) const |
| Returns True if v is equal to the second vtol_edge endpoint, v2_. | |
| virtual vtol_vertex_sptr | other_endpoint (const vtol_vertex &) const |
| This method works only for ImplicitLine edges. | |
| virtual void | print (vcl_ostream &strm=vcl_cout) const |
| This method outputs a brief vtol_edge info with vtol_edge object address. | |
| virtual void | describe (vcl_ostream &strm=vcl_cout, int blanking=0) const |
| This method outputs all edge information to the vcl_ostream, strm. | |
| virtual void | copy_geometry (const vtol_edge &other)=0 |
| have the inherited classes copy the geometry. | |
| virtual bool | compare_geometry (const vtol_edge &other) const =0 |
| compare the geometry. | |
| virtual vcl_string | is_a () const |
| Return a platform independent string identifying the class. | |
| virtual bool | is_class (const vcl_string &cls) const |
| Return true if the argument matches the string identifying the class or any parent class. | |
| virtual vtol_topology_object * | cast_to_topology_object () |
| virtual const vtol_topology_object * | cast_to_topology_object () const |
| virtual const vtol_vertex * | cast_to_vertex () const |
| Return `this' if `this' is a vertex, 0 otherwise. | |
| virtual vtol_vertex * | cast_to_vertex () |
| Return `this' if `this' is a vertex, 0 otherwise. | |
| virtual const vtol_zero_chain * | cast_to_zero_chain () const |
| Return `this' if `this' is a zero_chain, 0 otherwise. | |
| virtual vtol_zero_chain * | cast_to_zero_chain () |
| Return `this' if `this' is a zero_chain, 0 otherwise. | |
| virtual const vtol_chain * | cast_to_chain () const |
| Return `this' if `this' is a chain, 0 otherwise. | |
| virtual vtol_chain * | cast_to_chain () |
| Return `this' if `this' is a chain, 0 otherwise. | |
| virtual const vtol_one_chain * | cast_to_one_chain () const |
| Return `this' if `this' is a one_chain, 0 otherwise. | |
| virtual vtol_one_chain * | cast_to_one_chain () |
| Return `this' if `this' is a one_chain, 0 otherwise. | |
| virtual const vtol_face * | cast_to_face () const |
| Return `this' if `this' is a face, 0 otherwise. | |
| virtual vtol_face * | cast_to_face () |
| Return `this' if `this' is a face, 0 otherwise. | |
| virtual const vtol_two_chain * | cast_to_two_chain () const |
| Return `this' if `this' is a two_chain, 0 otherwise. | |
| virtual vtol_two_chain * | cast_to_two_chain () |
| Return `this' if `this' is a two_chain, 0 otherwise. | |
| virtual const vtol_block * | cast_to_block () const |
| Return `this' if `this' is a block, 0 otherwise. | |
| virtual vtol_block * | cast_to_block () |
| Return `this' if `this' is a block, 0 otherwise. | |
| bool | valid_superior_type (vtol_topology_object const *sup) const |
| Is `superior' type valid for `this' ?. | |
| bool | is_inferior (vtol_topology_object_sptr inferior) const |
| Is `inferior' already an inferior of `this' ?. | |
| bool | is_superior (vtol_topology_object *const &superior) const |
| Is `superior' already a superior of `this' ?. | |
| int | numinf () const |
| Number of inferiors. | |
| int | numsup () const |
| Number of superiors. | |
| const vcl_list < vtol_topology_object * > * | superiors_list () const |
| topology_list * | inferiors () |
| Return the inferiors list. | |
| const topology_list * | inferiors () const |
| virtual vsol_spatial_object_2d_type | spatial_type () const |
| Return the spatial type. | |
| void | unlink_all_inferiors () |
| Unlink `this' from all its inferiors. | |
| void | unlink () |
| Unlink `this' of the network. | |
| void | vertices (vertex_list &list) const |
| Get list of vertices. | |
| void | zero_chains (zero_chain_list &list) const |
| Get list of zero chains. | |
| void | edges (edge_list &list) const |
| Get list of edges. | |
| void | one_chains (one_chain_list &list) const |
| Get list of one chains. | |
| void | faces (face_list &list) const |
| Get list of faces. | |
| void | two_chains (two_chain_list &list) const |
| Get list of two chains. | |
| void | blocks (block_list &list) const |
| Get list of blocks. | |
| void | describe_inferiors (vcl_ostream &strm=vcl_cout, int blanking=0) const |
| void | describe_superiors (vcl_ostream &strm=vcl_cout, int blanking=0) const |
| virtual void | compute_bounding_box () const |
| compute the bounding box from the set of vertices. | |
| const char * | get_name () const |
| void | un_protect () |
| virtual vsol_spatial_object_2d * | clone () const =0 |
| short | version () const |
| virtual void | b_write (vsl_b_ostream &os) const |
| virtual void | b_read (vsl_b_istream &is) |
| bool | operator!= (vsol_spatial_object_2d const &obj) |
| vsol_box_2d_sptr | get_bounding_box () const |
| double | get_min_x () const |
| double | get_max_x () const |
| double | get_min_y () const |
| double | get_max_y () const |
| virtual vsol_spatial_object_2d * | cast_to_spatial_object () |
| virtual vsol_spatial_object_2d const * | cast_to_spatial_object () const |
| virtual vsol_spatial_object_2d * | cast_to_vsol_spatial_object () |
| virtual vsol_spatial_object_2d const * | cast_to_vsol_spatial_object () const |
| virtual vsol_point_2d * | cast_to_point () |
| virtual vsol_point_2d const * | cast_to_point () const |
| virtual vsol_curve_2d * | cast_to_curve () |
| virtual vsol_curve_2d const * | cast_to_curve () const |
| virtual vsol_region_2d * | cast_to_region () |
| virtual vsol_region_2d const * | cast_to_region () const |
| virtual vsol_group_2d * | cast_to_group () |
| virtual vsol_group_2d const * | cast_to_group () const |
| int | get_id () const |
| void | set_id (int i) |
| void | set_user_flag (unsigned int flag) |
| bool | get_user_flag (unsigned int flag) |
| void | unset_user_flag (unsigned int flag) |
| void | set_tagged_union_flag () |
| bool | get_tagged_union_flag () |
| void | unset_tagged_union_flag () |
| int | get_tag_id () |
| void | set_tag_id (int id) |
| void | touch () |
| unsigned long | get_time_stamp () const |
| bool | older (vul_timestamp const &t) const |
| bool | older (vul_timestamp const *t) const |
| void | ref () |
| void | unref () |
| int | get_references () const |
| bool | is_referenced () const |
Public Attributes | |
| SPATIAL_NO_TYPE | |
| TOPOLOGYOBJECT | |
| POINT | |
| CURVE | |
| REGION | |
| SPATIALGROUP | |
| VOLUME | |
| NUM_SPATIALOBJECT_TYPES | |
Static Public Attributes | |
| static const char * | SpatialTypes [] |
| static const float | eps |
Protected Types | |
| enum | vtol_topology_object_type { TOPOLOGY_NO_TYPE = 0, VERTEX, ZEROCHAIN, EDGE, ONECHAIN, FACE, TRIFACE, INTENSITYFACE, INTENSITYFACE3D, DDBINTENSITYFACE, TWOCHAIN, TRIMESHTWOCHAIN, BLOCK, NUM_TOPOLOGYOBJECT_TYPES } |
Protected Member Functions | |
| virtual vcl_vector < vtol_vertex * > * | compute_vertices () |
| Inferior/Superior Accessor Methods. | |
| virtual vcl_vector< vtol_edge * > * | compute_edges () |
| Returns a list with itself as the only element. This utility is used in Inferior/Superior accessing methods. | |
| virtual vcl_vector < vtol_zero_chain * > * | compute_zero_chains () |
| Returns the vtol_zero_chain list of the vtol_edge. This list is the Inferiors of the edge. | |
| virtual vcl_vector < vtol_one_chain * > * | compute_one_chains () |
| Returns a list of one_chains which contain the vtol_edge. This list is the Superiors of the edge. | |
| virtual vcl_vector< vtol_face * > * | compute_faces () |
| Returns a list of the faces which contain the vtol_edge. | |
| virtual vcl_vector < vtol_two_chain * > * | compute_two_chains () |
| Returns the list of two_chains which contain the vtol_edge. | |
| virtual vcl_vector< vtol_block * > * | compute_blocks () |
| Returns the list of blocks which contain the vtol_edge. | |
| void | not_applicable (vcl_string const &message) const |
| void | empty_bounding_box () const |
| void | set_bounding_box (vsol_box_2d_sptr const &box) const |
| void | set_bounding_box (double x, double y) const |
| void | add_to_bounding_box (double x, double y) const |
| void | add_to_bounding_box (vsol_box_2d_sptr const &box) const |
| void | grow_minmax_bounds (vsol_box_2d_sptr const &b) const |
| void | check_update_bounding_box () const |
Protected Attributes | |
| vtol_vertex_sptr | v1_ |
| vtol_vertex_sptr | v2_ |
| vcl_list< vtol_topology_object * > | superiors_ |
| topology_list | inferiors_ |
| unsigned int | tag_ |
| int | id_ |
| unsigned long | timestamp_ |
Static Protected Attributes | |
| static int | tagcount_ |
Private Member Functions | |
| virtual vtol_topology_object_type | topology_type () const |
| Return the topology type. | |
| virtual void | add_edge_loop (vtol_one_chain &) |
| virtual void | remove_edge_loop (vtol_one_chain &) |
Friends | |
| friend vcl_ostream & | operator<< (vcl_ostream &, vsol_spatial_object_2d const &) |
| friend vcl_ostream & | operator<< (vcl_ostream &, vsol_spatial_object_2d const *) |
Detailed Description
topological edge.
Definition at line 53 of file vtol_edge.h.
Member Enumeration Documentation
enum vtol_topology_object::vtol_topology_object_type [protected, inherited] |
- Enumerator:
TOPOLOGY_NO_TYPE VERTEX ZEROCHAIN EDGE ONECHAIN FACE TRIFACE INTENSITYFACE INTENSITYFACE3D DDBINTENSITYFACE TWOCHAIN TRIMESHTWOCHAIN BLOCK NUM_TOPOLOGYOBJECT_TYPES
Definition at line 132 of file vtol_topology_object.h.
Constructor & Destructor Documentation
| vtol_edge::vtol_edge | ( | ) | [inline] |
Default constructor. Empty edge. Not a valid edge.
Definition at line 73 of file vtol_edge.h.
| vtol_edge::~vtol_edge | ( | ) | [virtual] |
Destructor.
Definition at line 42 of file vtol_edge.cxx.
Member Function Documentation
| void vtol_edge::add_edge_loop | ( | vtol_one_chain_sptr const & | new_edge_loop | ) | [virtual] |
This is a utility method that adds new_edge_loop to the vtol_edge's superior list.
It returns a boolean value reflecting the success of linking.
Definition at line 145 of file vtol_edge.cxx.
| void vtol_edge::add_edge_loop | ( | vtol_one_chain & | new_edge_loop | ) | [private, virtual] |
Definition at line 151 of file vtol_edge.cxx.
| bool vtol_edge::add_vertex | ( | vtol_vertex_sptr const & | newvert | ) | [virtual] |
This method adds newvert to the vtol_edge by linking it to one of the zero_chains of the vtol_edge Inferiors.
(Method needs work.)
Definition at line 294 of file vtol_edge.cxx.
| void vtol_topology_object::blocks | ( | block_list & | list | ) | const [inherited] |
| virtual const vtol_block* vtol_topology_object::cast_to_block | ( | ) | const [inline, virtual, inherited] |
Return `this' if `this' is a block, 0 otherwise.
Reimplemented in vtol_block.
Definition at line 236 of file vtol_topology_object.h.
| virtual vtol_block* vtol_topology_object::cast_to_block | ( | ) | [inline, virtual, inherited] |
Return `this' if `this' is a block, 0 otherwise.
Reimplemented in vtol_block.
Definition at line 240 of file vtol_topology_object.h.
| virtual const vtol_chain* vtol_topology_object::cast_to_chain | ( | ) | const [inline, virtual, inherited] |
Return `this' if `this' is a chain, 0 otherwise.
Reimplemented in vtol_chain.
Definition at line 204 of file vtol_topology_object.h.
| virtual vtol_chain* vtol_topology_object::cast_to_chain | ( | ) | [inline, virtual, inherited] |
Return `this' if `this' is a chain, 0 otherwise.
Reimplemented in vtol_chain.
Definition at line 208 of file vtol_topology_object.h.
| virtual const vtol_edge* vtol_edge::cast_to_edge | ( | ) | const [inline, virtual] |
Return `this' if `this' is an edge, 0 otherwise.
Reimplemented from vtol_topology_object.
Definition at line 130 of file vtol_edge.h.
| virtual vtol_edge* vtol_edge::cast_to_edge | ( | ) | [inline, virtual] |
Return `this' if `this' is an edge, 0 otherwise.
Reimplemented from vtol_topology_object.
Definition at line 134 of file vtol_edge.h.
| virtual const vtol_edge_2d* vtol_edge::cast_to_edge_2d | ( | ) | const [inline, virtual] |
Return `this' if `this' is an edge, 0 otherwise.
Reimplemented in vtol_edge_2d.
Definition at line 138 of file vtol_edge.h.
| virtual vtol_edge_2d* vtol_edge::cast_to_edge_2d | ( | ) | [inline, virtual] |
Return `this' if `this' is an edge, 0 otherwise.
Reimplemented in vtol_edge_2d.
Definition at line 142 of file vtol_edge.h.
| virtual const vtol_face* vtol_topology_object::cast_to_face | ( | ) | const [inline, virtual, inherited] |
Return `this' if `this' is a face, 0 otherwise.
Reimplemented in vtol_face.
Definition at line 220 of file vtol_topology_object.h.
| virtual vtol_face* vtol_topology_object::cast_to_face | ( | ) | [inline, virtual, inherited] |
Return `this' if `this' is a face, 0 otherwise.
Reimplemented in vtol_face.
Definition at line 224 of file vtol_topology_object.h.
| virtual const vtol_one_chain* vtol_topology_object::cast_to_one_chain | ( | ) | const [inline, virtual, inherited] |
Return `this' if `this' is a one_chain, 0 otherwise.
Reimplemented in vtol_one_chain.
Definition at line 212 of file vtol_topology_object.h.
| virtual vtol_one_chain* vtol_topology_object::cast_to_one_chain | ( | ) | [inline, virtual, inherited] |
Return `this' if `this' is a one_chain, 0 otherwise.
Reimplemented in vtol_one_chain.
Definition at line 216 of file vtol_topology_object.h.
| virtual vtol_topology_object* vtol_topology_object::cast_to_topology_object | ( | ) | [inline, virtual, inherited] |
Reimplemented from vsol_spatial_object_2d.
Definition at line 175 of file vtol_topology_object.h.
| virtual const vtol_topology_object* vtol_topology_object::cast_to_topology_object | ( | ) | const [inline, virtual, inherited] |
Reimplemented from vsol_spatial_object_2d.
Definition at line 176 of file vtol_topology_object.h.
| virtual const vtol_two_chain* vtol_topology_object::cast_to_two_chain | ( | ) | const [inline, virtual, inherited] |
Return `this' if `this' is a two_chain, 0 otherwise.
Reimplemented in vtol_two_chain.
Definition at line 228 of file vtol_topology_object.h.
| virtual vtol_two_chain* vtol_topology_object::cast_to_two_chain | ( | ) | [inline, virtual, inherited] |
Return `this' if `this' is a two_chain, 0 otherwise.
Reimplemented in vtol_two_chain.
Definition at line 232 of file vtol_topology_object.h.
| virtual const vtol_vertex* vtol_topology_object::cast_to_vertex | ( | ) | const [inline, virtual, inherited] |
Return `this' if `this' is a vertex, 0 otherwise.
Reimplemented in vtol_vertex.
Definition at line 180 of file vtol_topology_object.h.
| virtual vtol_vertex* vtol_topology_object::cast_to_vertex | ( | ) | [inline, virtual, inherited] |
Return `this' if `this' is a vertex, 0 otherwise.
Reimplemented in vtol_vertex.
Definition at line 184 of file vtol_topology_object.h.
| virtual const vtol_zero_chain* vtol_topology_object::cast_to_zero_chain | ( | ) | const [inline, virtual, inherited] |
Return `this' if `this' is a zero_chain, 0 otherwise.
Reimplemented in vtol_zero_chain.
Definition at line 188 of file vtol_topology_object.h.
| virtual vtol_zero_chain* vtol_topology_object::cast_to_zero_chain | ( | ) | [inline, virtual, inherited] |
Return `this' if `this' is a zero_chain, 0 otherwise.
Reimplemented in vtol_zero_chain.
Definition at line 192 of file vtol_topology_object.h.
| virtual bool vtol_edge::compare_geometry | ( | const vtol_edge & | other | ) | const [pure virtual] |
compare the geometry.
Implemented in vtol_edge_2d.
| vcl_vector< vtol_block * > * vtol_edge::compute_blocks | ( | void | ) | [protected, virtual] |
Returns the list of blocks which contain the vtol_edge.
Reimplemented from vtol_topology_object.
Definition at line 257 of file vtol_edge.cxx.
| void vtol_topology_object::compute_bounding_box | ( | void | ) | const [virtual, inherited] |
compute the bounding box from the set of vertices.
A generic method that applies to all topology_object(s)
Reimplemented from vsol_spatial_object_2d.
Reimplemented in vtol_face, vtol_vertex_2d, vtol_one_chain, and vtol_edge_2d.
Definition at line 389 of file vtol_topology_object.cxx.
| vcl_vector< vtol_edge * > * vtol_edge::compute_edges | ( | void | ) | [protected, virtual] |
Returns a list with itself as the only element. This utility is used in Inferior/Superior accessing methods.
Reimplemented from vtol_topology_object.
Definition at line 232 of file vtol_edge.cxx.
| vcl_vector< vtol_face * > * vtol_edge::compute_faces | ( | void | ) | [protected, virtual] |
Returns a list of the faces which contain the vtol_edge.
Reimplemented from vtol_topology_object.
Definition at line 245 of file vtol_edge.cxx.
| vcl_vector< vtol_one_chain * > * vtol_edge::compute_one_chains | ( | void | ) | [protected, virtual] |
Returns a list of one_chains which contain the vtol_edge. This list is the Superiors of the edge.
Reimplemented from vtol_topology_object.
Definition at line 238 of file vtol_edge.cxx.
| vcl_vector< vtol_two_chain * > * vtol_edge::compute_two_chains | ( | void | ) | [protected, virtual] |
Returns the list of two_chains which contain the vtol_edge.
Reimplemented from vtol_topology_object.
Definition at line 251 of file vtol_edge.cxx.
| vcl_vector< vtol_vertex * > * vtol_edge::compute_vertices | ( | void | ) | [protected, virtual] |
Inferior/Superior Accessor Methods.
Returns a list of vertices on the vtol_edge.
Reimplemented from vtol_topology_object.
Definition at line 220 of file vtol_edge.cxx.
| vcl_vector< vtol_zero_chain * > * vtol_edge::compute_zero_chains | ( | void | ) | [protected, virtual] |
Returns the vtol_zero_chain list of the vtol_edge. This list is the Inferiors of the edge.
Reimplemented from vtol_topology_object.
Definition at line 226 of file vtol_edge.cxx.
| virtual void vtol_edge::copy_geometry | ( | const vtol_edge & | other | ) | [pure virtual] |
have the inherited classes copy the geometry.
Implemented in vtol_edge_2d.
| void vtol_edge::describe | ( | vcl_ostream & | strm = vcl_cout, |
| int | blanking = 0 |
||
| ) | const [virtual] |
This method outputs all edge information to the vcl_ostream, strm.
It indents various levels of output by the number given in blanking.
Reimplemented from vtol_topology_object.
Reimplemented in vtol_edge_2d.
Definition at line 360 of file vtol_edge.cxx.
| void vtol_topology_object::describe_inferiors | ( | vcl_ostream & | strm = vcl_cout, |
| int | blanking = 0 |
||
| ) | const [inherited] |
Definition at line 277 of file vtol_topology_object.cxx.
| void vtol_topology_object::describe_superiors | ( | vcl_ostream & | strm = vcl_cout, |
| int | blanking = 0 |
||
| ) | const [inherited] |
Definition at line 294 of file vtol_topology_object.cxx.
| void vtol_topology_object::edges | ( | edge_list & | list | ) | const [inherited] |
| vertex_list * vtol_edge::endpoints | ( | void | ) | [virtual] |
get a list of endpoints.
Returns a list of vertices containing the endpoints of the edge.
These vertices are v1_ and v2_ in that order.
Definition at line 264 of file vtol_edge.cxx.
| void vtol_topology_object::faces | ( | face_list & | list | ) | const [inherited] |
| topology_list* vtol_topology_object::inferiors | ( | ) | [inline, inherited] |
Return the inferiors list.
Definition at line 280 of file vtol_topology_object.h.
| const topology_list* vtol_topology_object::inferiors | ( | ) | const [inline, inherited] |
Definition at line 281 of file vtol_topology_object.h.
| virtual vcl_string vtol_edge::is_a | ( | ) | const [inline, virtual] |
Return a platform independent string identifying the class.
Implements vsol_spatial_object_2d.
Reimplemented in vtol_edge_2d.
Definition at line 197 of file vtol_edge.h.
| virtual bool vtol_edge::is_class | ( | const vcl_string & | cls | ) | const [inline, virtual] |
Return true if the argument matches the string identifying the class or any parent class.
Reimplemented in vtol_edge_2d.
Definition at line 200 of file vtol_edge.h.
| bool vtol_edge::is_endpoint | ( | vtol_vertex_sptr const & | v | ) | const [virtual] |
Definition at line 322 of file vtol_edge.cxx.
| bool vtol_edge::is_endpoint1 | ( | vtol_vertex_sptr const & | v | ) | const [virtual] |
Returns True if v is equal to the first vtol_edge endpoint,v1_.
Definition at line 329 of file vtol_edge.cxx.
| bool vtol_edge::is_endpoint2 | ( | vtol_vertex_sptr const & | v | ) | const [virtual] |
Returns True if v is equal to the second vtol_edge endpoint, v2_.
Definition at line 335 of file vtol_edge.cxx.
| bool vtol_topology_object::is_inferior | ( | vtol_topology_object_sptr | inferior | ) | const [inherited] |
Is `inferior' already an inferior of `this' ?.
Definition at line 51 of file vtol_topology_object.cxx.
| bool vtol_topology_object::is_superior | ( | vtol_topology_object *const & | superior | ) | const [inherited] |
Is `superior' already a superior of `this' ?.
Definition at line 64 of file vtol_topology_object.cxx.
| void vtol_edge::link_inferior | ( | vtol_zero_chain_sptr | inferior | ) |
Link `this' with an inferior `inferior'.
REQUIRE: valid_inferior_type(inferior) and !is_inferior(inferior)
Require: valid_inferior_type(inferior) and !is_inferior(inferior)
Reimplemented from vtol_topology_object.
Definition at line 15 of file vtol_edge.cxx.
| int vtol_topology_object::numinf | ( | ) | const [inline, inherited] |
Number of inferiors.
Definition at line 265 of file vtol_topology_object.h.
| int vtol_topology_object::numsup | ( | ) | const [inline, inherited] |
Number of superiors.
Definition at line 269 of file vtol_topology_object.h.
| void vtol_topology_object::one_chains | ( | one_chain_list & | list | ) | const [inherited] |
Get list of one chains.
get list of one chains.
Definition at line 216 of file vtol_topology_object.cxx.
| bool vtol_edge::operator!= | ( | const vtol_edge & | other | ) | const [inline] |
Definition at line 114 of file vtol_edge.h.
| bool vtol_edge::operator== | ( | const vtol_edge & | other | ) | const [virtual] |
Reimplemented in vtol_edge_2d.
Definition at line 183 of file vtol_edge.cxx.
| bool vtol_edge::operator== | ( | const vsol_spatial_object_2d & | obj | ) | const [virtual] |
spatial object equality.
Reimplemented from vsol_spatial_object_2d.
Reimplemented in vtol_edge_2d.
Definition at line 205 of file vtol_edge.cxx.
| vtol_vertex_sptr vtol_edge::other_endpoint | ( | const vtol_vertex & | overt | ) | const [virtual] |
This method works only for ImplicitLine edges.
Definition at line 342 of file vtol_edge.cxx.
| void vtol_edge::print | ( | vcl_ostream & | strm = vcl_cout | ) | const [virtual] |
This method outputs a brief vtol_edge info with vtol_edge object address.
Reimplemented from vtol_topology_object.
Reimplemented in vtol_edge_2d.
Definition at line 376 of file vtol_edge.cxx.
| void vtol_edge::remove_edge_loop | ( | vtol_one_chain_sptr const & | doomed_edge_loop | ) | [virtual] |
This is a utility method that removes doomed_edge_loop from the vtol_edge's superior list.
It returns a boolean value reflecting the success of removing.
Definition at line 163 of file vtol_edge.cxx.
| void vtol_edge::remove_edge_loop | ( | vtol_one_chain & | doomed_edge_loop | ) | [private, virtual] |
Definition at line 169 of file vtol_edge.cxx.
| bool vtol_edge::remove_vertex | ( | vtol_vertex_sptr const & | uglyvert | ) | [virtual] |
This method removes uglyvert from the vtol_edge by removing it from the inferior zero_chains.
(Method needs work.)
Definition at line 310 of file vtol_edge.cxx.
| void vtol_edge::replace_end_point | ( | vtol_vertex & | curendpt, |
| vtol_vertex & | newendpt | ||
| ) | [virtual] |
replace the current end point.
Set the first and last endpoints.
Require: vertex_of_edge(new_v1) and vertex_of_edge(new_v2).
This function removes curendpt from the edge and replaces it with newendpt. Both curendpt and newendpt must be non-NULL pointers, curendpt must point to an endpoint of the edge (either v1_ or v2_), and newendpt must be collinear with the edge. Neither vertex is destroyed in the process; only links are manipulated. (RYF 7-14-98)
Definition at line 80 of file vtol_edge.cxx.
| void vtol_edge::set_v1 | ( | vtol_vertex_sptr | new_v1 | ) | [virtual] |
Set the first endpoint.
Definition at line 49 of file vtol_edge.cxx.
| void vtol_edge::set_v2 | ( | vtol_vertex_sptr | new_v2 | ) | [virtual] |
Set the last endpoint.
Definition at line 60 of file vtol_edge.cxx.
| void vtol_edge::set_vertices_from_zero_chains | ( | void | ) | [virtual] |
Determine the endpoints of an edge from its inferiors.
Definition at line 95 of file vtol_edge.cxx.
| bool vtol_edge::share_vertex_with | ( | vtol_edge_sptr const & | other | ) | [virtual] |
Returns true if the invoking edge has a vertex in common with vtol_edge `other'.
The method determines if the two edges share a vertex by comparing pointer values, not the vertex geometry.
Definition at line 279 of file vtol_edge.cxx.
| virtual vsol_spatial_object_2d_type vtol_topology_object::spatial_type | ( | void | ) | const [inline, virtual, inherited] |
Return the spatial type.
Implements vsol_spatial_object_2d.
Definition at line 285 of file vtol_topology_object.h.
| const vcl_list<vtol_topology_object*>* vtol_topology_object::superiors_list | ( | ) | const [inline, inherited] |
Definition at line 276 of file vtol_topology_object.h.
| virtual vtol_topology_object_type vtol_edge::topology_type | ( | ) | const [inline, private, virtual] |
Return the topology type.
Reimplemented from vtol_topology_object.
Definition at line 81 of file vtol_edge.h.
| void vtol_topology_object::two_chains | ( | two_chain_list & | list | ) | const [inherited] |
Get list of two chains.
get list of two chains.
Definition at line 248 of file vtol_topology_object.cxx.
| void vtol_topology_object::unlink | ( | void | ) | [inherited] |
Unlink `this' of the network.
Reimplemented in vtol_chain.
Definition at line 152 of file vtol_topology_object.cxx.
| void vtol_topology_object::unlink_all_inferiors | ( | void | ) | [inherited] |
Unlink `this' from all its inferiors.
Definition at line 143 of file vtol_topology_object.cxx.
| void vtol_edge::unlink_inferior | ( | vtol_zero_chain_sptr | inferior | ) |
Unlink `this' from the inferior `inferior'.
Unlink `this' with the inferior `inferior'.
REQUIRE: valid_inferior_type(inferior) and is_inferior(inferior)
Require: valid_inferior_type(inferior) and is_inferior(inferior)
Reimplemented from vtol_topology_object.
Definition at line 20 of file vtol_edge.cxx.
| vtol_vertex_sptr vtol_edge::v1 | ( | ) | const [inline] |
Return the first endpoint.
Definition at line 86 of file vtol_edge.h.
| vtol_vertex_sptr vtol_edge::v2 | ( | ) | const [inline] |
Return the second endpoint.
Definition at line 90 of file vtol_edge.h.
| virtual bool vtol_edge::valid_inferior_type | ( | vtol_topology_object const * | inferior | ) | const [inline, virtual] |
Is `inferior' type valid for `this' ?.
Implements vtol_topology_object.
Definition at line 153 of file vtol_edge.h.
| bool vtol_edge::valid_inferior_type | ( | vtol_zero_chain_sptr const & | ) | const [inline] |
Definition at line 155 of file vtol_edge.h.
| bool vtol_edge::valid_superior_type | ( | vtol_one_chain_sptr const & | ) | const [inline] |
Definition at line 156 of file vtol_edge.h.
| bool vtol_topology_object::valid_superior_type | ( | vtol_topology_object const * | sup | ) | const [inline, inherited] |
Is `superior' type valid for `this' ?.
Definition at line 252 of file vtol_topology_object.h.
| void vtol_topology_object::vertices | ( | vertex_list & | list | ) | const [inherited] |
Get list of vertices.
get list of vertices.
Definition at line 170 of file vtol_topology_object.cxx.
| vtol_zero_chain_sptr vtol_edge::zero_chain | ( | void | ) | const [virtual] |
Return the first non-empty zero-chain of `this'.
Definition at line 27 of file vtol_edge.cxx.
| void vtol_topology_object::zero_chains | ( | zero_chain_list & | list | ) | const [inherited] |
Get list of zero chains.
get list of zero chains.
Definition at line 184 of file vtol_topology_object.cxx.
Member Data Documentation
topology_list vtol_topology_object::inferiors_ [protected, inherited] |
Definition at line 130 of file vtol_topology_object.h.
vcl_list<vtol_topology_object*> vtol_topology_object::superiors_ [protected, inherited] |
Definition at line 125 of file vtol_topology_object.h.
vtol_vertex_sptr vtol_edge::v1_ [protected] |
Definition at line 63 of file vtol_edge.h.
vtol_vertex_sptr vtol_edge::v2_ [protected] |
Definition at line 64 of file vtol_edge.h.
The documentation for this class was generated from the following files:
- contrib/gel/vtol/vtol_edge.h
- contrib/gel/vtol/vtol_edge.cxx
